DS-03S Dry ice blaster
DSJet Dry ice blaster
DSJet dry ice cleaning equipment DS-03S help industrial environmental protection cleaning, use dry ice (solid carbon dioxide) as the main cleaning medium, through the surface blast cleaning, you can achieve non-destructive cleaning effect, automated dry ice cleaning is possible, you can achieve PCBA cleaning, wafer cleaning, and other types of precision cleaning.
Related accessories
No related accessories!!Built-in efficient filtration device, efficient and fast filtration of air water, oil, rust and other impurities. Fully guarantee the pcba circuit board and precision mold safety and environmental protection of lossless cleaning.
Traditional cleaning methods use chemicals and manual tools, which are dry and inefficient. Desijie's alternative cleaning process provides a non-wear and environmentally friendly way to complete electronics cleaning and molds in a very short time, thus extending the period of preventive maintenance intervals. In addition, it can be run in situ.
The core components of the equipment are all imported components
- -Spray dry ice particles: 0.01-0.3mm
- -Dry ice hopper capacity: 9.1 KG
- -Gas supply pressure range: 2-9.9Bar
- -Dry ice adjustable range: 0-0.6KG
- -Compressed air flow rate: 0.8-4 ㎡ / min
- -Overall dimension: 57 * 40 * 51cm
- -Dry ice injection tube: 3.7m
- -Compressed air pipe: 6.5m
Advantages of dry ice cleaning
1.Efficient
Traditional cleaning requires disassembly, cooling, cleaning and reassembly; dry ice cleaning can be cleaned online without removing equipment; improve efficiency and ensure the accuracy of equipment.
2.Completely
It is difficult to clean the mold with high precision and complex structure; dry ice cleaning can effectively clean the corners, gaps and dead corners; no pollution, no residue and green protection.
3.No damage
Traditional cleaning, grinding, soaking and other methods damage the mold circuit board, reduce the accuracy and product quality; dry ice cleaning strength can be adjusted arbitrarily, no damage to the mold and pcba circuit board, prolong the service life of the mold, and improve the product quality.
4.Dry
Traditional cleaning will use water, solvent, produce conductive, residual; dry ice cleaning can contact the electrical part, no conductive, no corrosion, no rust.
5.Environmental protection
Traditional cleaning uses water and solvents, which affects human health, causes secondary pollution to the environment
| Dry Ice Capacity： | 9.1kg |
| Dry Ice Block Size： | 150mm*150mm*300mm 125mm*125mm*300mm |
| Dry Ice Consumption Range： | 0-0.6KG/min |
| Dry Ice Pellet Size： | 0.01-0.3mm |
| Air Pressure Range： | 0.15-9.9bar |
| Air Consumption Range： | 0.8-4m³/min |
| External Dimensions (L*W*H)： | 57cm*40cm*51cm |
| Power Supply： | 220VAC,1ph(50HZ),4Amp |
| Dry Ice Output Style： | Single Hose |
Online cleaning, no need to dismantle the equipment
No pollution, no residue, environment friendly
Non-conductive, non-corrosive, non-rusting
No secondary waste
